PET plastic injection machine

PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET  plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing.2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension

Specofocation	Unit	ALL168
injection unit
screw diameter	mm	48
screw l/d ratio	L/D	25
shot volume(theoretical)	cm	389
shot weight	g	350
injection pressure	mpa	140
injection speed	mm/s	114
screw speed	rpm	0-180
clamping unit
clamping force	KN	1680
toggle stroke	mm	425
space between tie bars	mm	465X465
max.mould height	mm	480
min.mould height	mm	180
ejector stroke	mm	130
ejector force	KN	39.6
ejector number	PG	5
others
max.pump pressure	Mpa	16
pump motor power	KW	16
heater power	KW	11.2
machine dimensions(LXWXH)	m	5.18X1.21X2.22
oil tank capacity	L	200
machine weight	Ton	5.5

PET plastic injection machine